New SAL SYG CYL traffic signal columns

In order to optimize costs, a new family of vertical cylindrical traffic signal columns has been added to the ROSA Group's offer.

The columns are intended for hanging signalling devices at road intersections and pedestrian crossings.

Characteristics:

Two versions of aluminium profiles with a diameter of ɸ100 and ɸ114;
Installation in two variants: as columns with bases dedicated for installation on prefabricated foundations or reinforcement baskets or as columns to the ground;
Types: ɸ100 column 2.5 m, 2.7 m and 3.05 m high - dedicated to the use of single-chamber and two-chamber lanterns, ɸ114 column 3.3 m and 3.5 m high - dedicated to the use of single-chamber, double-chamber and triple-chamber lanterns;
550x75mm wiring chamber as standard equipped with a removable DIN rail for terminal blocks commonly used in traffic signal columns;
Colour: 10 anodizing colours, each with the possibility of brightening;
Material: finish of the columns is shot-blasted aluminium with the possibility of securing them with elastomer in the colour of the column up to a height of 350 mm or other height on client’s request.

The strength of the structure is specified in the product data sheet.

In the case of a different load configuration, the data should be sent to the sales department in order to perform individual strength calculations.

Cantilever traffic signal columns SAL SYG 300

Cantilever traffic signal columns have been added to the ROSA Group's offer. They are designed for hanging signalling devices and signs at road intersections and pedestrian crossings, and as equipment for detection. These are columns with a cylindrical cross-section with an aluminium profile of ɸ300 diameter.

Characteristics:

Height 6.5 m;
Arm: two-element rolled cones, 7 m, 8 m, 9 m long, with the possibility of turning the arm every 15° and convenient cable routing;
Specially dedicated reinforcement baskets.

The strength of the structure is specified in the product data sheet.

In the case of a different load configuration, the data should be sent to the sales department in order to perform individual strength calculations.

Articles