ROSA lighting columns with confirmation of passive safety features
According to the test results, almost all anodised aluminium lighting columns manufactured by ROSA possess passive safety features . Due to these properties,
they minimise the effects of traffic collisions on those involved in such an incident which is of great importance for the health and safety of road users.
they minimise the effects of traffic collisions on those involved in such an incident which is of great importance for the health and safety of road users.
Conducting tests
Passive safety features were tested at TASS International, an independent laboratory
in the Netherlands known for testing
for the automotive industry.
in the Netherlands known for testing
for the automotive industry.
ROSA columns have the following functional properties in terms of passive safety classification:
for SAL cylindrical-conical aluminum lighting columns, with a base, diameter
at the base: Ø114, Ø120, Ø146 and Ø178 with or without extension arm
100-NE-B-S-SE-MD-0
70-NE-B-S-SE-MD-0
50-NE-B-S-SE-MD-0
(according to EN 12767: 2007 respectively 100NE3, 70NE3 and 50NE3)
at the base: Ø114, Ø120, Ø146 and Ø178 with or without extension arm
100-NE-B-S-SE-MD-0
70-NE-B-S-SE-MD-0
50-NE-B-S-SE-MD-0
(according to EN 12767: 2007 respectively 100NE3, 70NE3 and 50NE3)
for aluminum lighting columns SAL and MAL cylindrical-conical from Ø 114
to Ø 225 mm buried in the ground and SAL Ø 176 (ON) and Ø 180 (M, WŁN)
with a base with or without extension arms
100-NE-C-S-SE-MD-0
70-NE-C-S-SE-MD-0
50-NE-C-S-SE-MD-0
(according to EN 12767: 2007 respectively 100NE2, 70NE2 and 50NE2)
to Ø 225 mm buried in the ground and SAL Ø 176 (ON) and Ø 180 (M, WŁN)
with a base with or without extension arms
100-NE-C-S-SE-MD-0
70-NE-C-S-SE-MD-0
50-NE-C-S-SE-MD-0
(according to EN 12767: 2007 respectively 100NE2, 70NE2 and 50NE2)
This means that the ROSA brand columns:
- were classified as "non-energy absorbing",
- during impact, they are sheared off at the base and the shaft of the column is separated from the rooted section,
- retain passive safety features after an impact from all directions (highest rating),
- have a safety level defined as B and C which is the highest achievable for products such as lighting columns (category A is only achievable for products made of soft, deformable materials),
- have proven passive safety properties for speeds of 50km/h, 70km/h and 100km/h,
- the risk of deformation of the car roof as a result of a collision with a Rosa column is 0 and means no or low risk (highest score).
- during impact, they are sheared off at the base and the shaft of the column is separated from the rooted section,
- retain passive safety features after an impact from all directions (highest rating),
- have a safety level defined as B and C which is the highest achievable for products such as lighting columns (category A is only achievable for products made of soft, deformable materials),
- have proven passive safety properties for speeds of 50km/h, 70km/h and 100km/h,
- the risk of deformation of the car roof as a result of a collision with a Rosa column is 0 and means no or low risk (highest score).